Fleet Hero

Decking & Shoring Beams

3 products

A shoring beam (also called a decking beam or shoring bar) is an adjustable load beam with a spring E-fitting on each end that locks into opposing E-track rails. Run across the trailer, shoring beams brace cargo so it cannot shift.

Browse Subcategories

All Decking & Shoring Beams Products

Filters

$
—
$

3 products

What Are Shoring Beams?

A shoring beam (also called a decking beam or shoring bar) is an adjustable load beam with a spring E-fitting on each end that locks into opposing E-track rails. Run across the trailer, shoring beams brace cargo so it cannot shift. Set several at the same height, lay plywood on top, and they create a second deck level that doubles usable floor space. Both ends click into the E-track slots and release with a lever, even in gloves. These heavy-duty E-track bars handle real bracing and decking work, not light blocking.

Types of Shoring and Decking Beams We Carry


Choosing the right shoring beam starts with your cargo and how you work.

  • Aluminum shoring beams - These are high-strength and light, which makes them easy to handle during a long shift, and they offer a solid working load limit for most securement needs. An excellent choice for frequent adjustments and decking setups where weight matters.

  • Steel decking beams - Steel is the choice for maximum durability and high-cycle use. These beams are built tough for heavy loads and repeated hard work. They offer a different load limit compared to aluminum, making them suitable for specific heavy-duty requirements.

  • Adjustable-length beams - Trailers come in different widths. Adjustable beams are designed to span a range of widths, fitting securely into your E-track system to provide a stable hold.

  • 2x4 wood sockets - These are simple brackets that clip into your E-track. You can slide a standard 2x4 into the socket to create a custom, cost-effective shoring bar for lighter-duty decking.

  • Beam holders -When the beams are not in use, a wall-mounted beam holder keeps them stored neatly. This protects the bars and keeps your workspace organized.

Shoring Beam Sizes, Material and Capacity


Choosing the right shoring beams means matching the specs to the job. Here is what to look for in size, material, and capacity.

Working load limits. Aluminum shoring beams typically carry about a 2,200 lb WLL with roughly 6,000 lb assembly break strength. Steel decking beams are often rated around 1,500 lb WLL. Always check the specific model's rating for your load.

Adjustable lengths. Most beams span about 85" to 107" to fit standard trailer interior widths. This adjustability lets you use the same beam across different trailers.

Attachment system. Spring E-fittings on each end snap into standard horizontal or vertical E-track. Vertical track lets you set deck height precisely.

For decking with plywood, space beams evenly and keep the total load within the beams' combined WLL. Aluminum beams are lighter on your back; steel takes the roughest duty.

Where Drivers Use Shoring Beams


You’ll see shoring beams locked into dry vans and enclosed trailers whenever a partial load needs real bracing instead of just a strap. They also turn a single floor into two by setting bars at matching height and dropping plywood across them for double-decking. LTL crews use them to keep palletized freight separated and stable. Movers run them to hold stacked furniture in place. Any E-track trailer that calls for a rated bar rather than a tension lock is the right place for these.

How to Choose and Use Shoring Beams

Choose aluminum when you need the higher WLL or lighter handling all day. Go with steel for high-cycle runs and rough environments. Match the adjustable range to your trailer’s interior width so both ends have room to seat fully. Snap each E-fitting into opposing rails and make sure the lever locks tight. When building a deck, keep the total load inside the beams’ combined WLL and space them so the plywood sits solid. Check fittings, springs and tubes regularly and swap out worn pins or ends.

Why Order Shoring Beams from Fleet Hero


Finding shoring beams for sale with true commercial specs is essential for dry van and LTL operations. Choose from an adjustable aluminum / steel inventory designed to handle high-cycle demands. Every load beam features precise WLL ratings and spring-loaded end fittings that clip cleanly into trailer track. Complete product specifications are provided up front so you select the exact length and strength for your rig. You can build a complete E-track system by pairing your decking beams with track rails, logistics straps, load locks, or a 2x4 socket fitting in one order.