Fleet Hero

Lifting Shackles

4 products

A shackle is a structural forged steel connector fastened by a removable pin, binding slings, chains, or hoist hooks directly to cargo loads.

Browse Subcategories

All Lifting Shackles Products

Filters

$
—
$

4 products

What Are Shackles?

A shackle is a structural forged steel connector fastened by a removable pin, binding slings, chains, or hoist hooks directly to cargo loads.  Selecting heavy- duty lifting shackles requires matching the profile to your pull angles: a wide anchor / bow shackle accepts multi-leg rigging arrangements, while a straight chain / D shackle suits direct inline tension. 

For pin security, use a rapid screw pin for quick hookups, or a bolt type assembly to resist unthreading from road vibration. Every certified frame bears its working load limit stamped on the alloy, providing maximum safety for trailer shackles and general shackle lifting. 

Types of Shackles We Carry

  • Screw-Pin Anchor Shackles - The workhorse for temporary jobs. Threads turn by hand, then you snug them with a wrench. Perfect for pick-and-place rigging, trailer tie-downs, and towing setups where you're connecting and disconnecting all day.

  • Bolt-Type Shackles - Built to stay locked. A bolt, nut, and cotter pin secure the pin permanently. These handle vibration without backing out-your choice for long-term installations and rotating loads.

  • Chain (D) Shackles - Narrow U-shape for straight-line pulls only. Use these on chain connections and single-leg slings where side-loading isn't a factor. No angling-just in-line tension.

  • Material Choices - Carbon steel handles everyday work. Alloy gives you more capacity in a smaller size. Galvanized fights corrosion. Stainless stands up to marine environments and washdown areas.

Drop-forged construction across every size-import and domestic options available.

Shackle Sizes, WLL and Material Grades

Lifting shackles are sized by pin and bow diameter, typically ranging from 1/4" up to 1-1/2" and larger. Working load limits increase right along with physical dimensions, climbing from roughly 1/2 ton on a 1/4" model up to 17 tons or more on a 1-1/2" unit. Comparing alloy vs. carbon WLL, high-strength alloy shackles deliver a much higher rating than standard carbon steel at the same physical size, letting you drop down a size to cut weight.

For overhead-lifting applications, heavy - duty shackles must meet ASME B30.26 standards, with the size, grade, and working load clearly stamped directly on the forged bow.

When configuring trailer shackles or lift shackles, always choose the pin design carefully. Screw pin styles allow quick connection, but they can unthread under rotation or continuous vibration-making bolt type shackles the safer choice for long-term installations. Always match the pin diameter to your sling eye and hook throat to avoid side loading, jamming, or binding.

Where Riggers and Haulers Use Shackles


Heavy-duty shackles bridge slings, chain and hooks to the load. A bridle sling gathers at a master link before the hook. These lifting shackles anchor lift points on steel coils, lumber and pipe. On flatbeds and trailers, they serve as tie-down / recovery points rated to WLL. In construction and marine rigging assembly, they connect turnbuckles, blocks and Grade 70/80 chain.

How to Choose and Inspect Shackles 

Match the hardware to your pull direction. Choose an anchor or bow shackle when rigging multi-leg slings or handling off-axis pulls, but stick to a straight D shackle for inline tension only. Select a screw pin for quick, temporary tie-downs, or a bolt - type for long-haul transport and vibrating loads where pins could back out. Always confirm the stamped WLL exceeds your intended load with an adequate design factor, and never side- Type 3 / Type 4load a screw pin across its threads.  Inspect heavy - duty shackles before every lift per ASME B30.26 standards.

Pull hardware from service immediately if you spot a bent bow / stretched pin, thread damage, severe corrosion, or an unreadable rating mark. When setting up, fully seat the pin-never substitute a standard hardware bolt for the original shackle pin. 

Why Order Shackles from Fleet Hero


Get the full range of anchor and D shackles-screw-pin and bolt-type-from light utility work to heavy tonnage. Every unit is forged, WLL- stamped and rated to ASME B30.26 for overhead lifting. Choose galvanized, alloy or stainless finishes for shop floors, flatbed runs or marine service. Pair them with slings, hooks and chain in the same order to build a complete rigging setup without chasing parts.
At
Fleet-hero.com you will find shackles trusted by riggers and haulers, with fast shipping across the US.