Fleet Hero

Truck Fuses

1 product

Browse Subcategories

All Truck Fuses Products

Filters

$
—
$

1 product

What Are Truck Fuses? 

A truck fuse is a small blade fuse overcurrent device designed to safeguard individual electrical circuits. When excessive amp draw occurs, the internal metal element melts to prevent wiring damage. Rated for 32 V DC, standard (ATO) and mini (ATM) blade options protect 12-volt systems on commercial rigs.

Unlike a circuit breaker that resets, a blown fuse requires replacement. Heavy-duty semi trucks rely on these components alongside high-current units across each fuse panel / power distribution module.

Types of Truck Fuses We Carry

  • ATO / ATC standard blade fuses - about 19 mm wide, the most common fuse on cars, trucks and buses. These handle lighting, accessory and control circuits.

  • ATM mini blade truck fuses - about 11 mm wide, built for the tighter fuse panels on newer trucks.

  • Fuse assortment kits - compartment cases with several fuses of each common amp rating, plus a plastic fuse puller. Sized to ride in a side box or cab storage.

  • Bulk cases - for fleets and shops that restock several trucks at once.

  • High-current MAXI, MIDI and MEGA bolt-down fuses - these protect main battery and alternator circuits and are a different product, not in a blade fuse kit.

Truck Fuses: Sizes, Amp Ratings and Color Codes 

Truck fuses come in distinct footprint specifications. Standard blade (ATO / ATC) and mini blades carry a 1,000 A interrupting rating at 32 V DC built to SAE J1284 / ISO 8820-3 standards. Knowing standard vs mini vs MAXI dimensions ensures exact replacement in commercial vehicle fuse kit applications.

Truck Fuses: Physical Sizes

Standard & Mini Blade Color Code (SAE J1284 / ISO 8820-3)

Standard blade and mini blades follow the same colors and run 2-30 A in the Bussmann and Littelfuse ranges; low-profile minis use the same ratings and color code.

MAXI fuses use their own colors-for example 25 A gray, 35 A brown, and 50 A red-so do not match a MAXI by the standard blade chart. Keep a truck fuse kit with a dedicated fuse puller on hand to swap blown units quickly.

Where Drivers and Truck Shops Use Truck Fuses

On a Freightliner Cascadia the trailer power distribution module uses 20 A fuses for turn signals and 30 A truck fuses for stop, tail and marker lamps-common spots for a blown fuse after trailer wiring damage.

Cab and chassis panels sit behind the glove box and on the driver-side frontwall under the hood; the manual’s fuse chart shows which one. Beacon lights, inverters and extra lighting run through their own fuses in an auxiliary module.

How to Find and Replace a Blown Truck Fuse

A blown fuse is usually a quick roadside fix, but only if you find the right circuit and use the right replacement. Start with the fuse chart in the driver's manual - it shows which fuse protects which circuit, so you are not guessing in a panel full of blades. To tell if a truck fuse is blown, look through the clear housing for a broken metal element, or touch a fuse tester to the test points on top of the fuse without pulling it.

Pull the fuse with a fuse puller rather than pliers, so the holder terminals are not damaged. Replace it with a fuse for truck use of exactly the same amp rating - never install a higher-rated fuse than the circuit, holder or wire is designed for. If the new fuse blows again or a breaker keeps cycling, there is a fault in the circuit: find and fix it instead of feeding it bigger truck fuses.

Why Order Truck Fuses from Fleet-Hero

A truck fuse kit packs standard and mini blade fuses plus a fuse puller in one compact case. Fleet shops and multi-truck operators can grab a bulk case to restock the bench or several trucks at once. These fuses ship in the same order as the hand tools, tire tools and cargo securement a driver already carries.

At Fleet-hero.com you will find truck fuses trusted by owner-operators and fleet shops, with fast shipping to the Lower 48.