Air Lines & Gladhands
2 productsBrowse Subcategories
All Air Lines & Gladhands Products
Filters
2 products
Sort by:

What Are Semi Truck Air Lines and Gladhands?
Every tractor-trailer runs two semi truck air lines: the blue service line that sends foot-brake signal pressure straight to trailer relay valves, and the red emergency line that charges air tanks and sets trailer brakes if the tractor protection valve detects pressure loss. Heavy-duty trailer gladhand couplers with rubber seals lock face-to-face under SAE J318 specs to maintain an airtight connection across every haul.
Types of Air Lines and Gladhands We Carry
Coiled air lines (red and blue pair) or single service and emergency coils with plated steel spring guard and swivel on the tractor end
3-in-1 air and electrical wrap that bundles the red and blue lines with a 7-way cable in ABS or non-ABS versions
Polarized and universal gladhand – polarized keys stop crossed hookups, universal has no keys
Gladhand bodies in aluminum, anodized aluminum for road salt, or cast iron, straight or angled trailer-mount
Accessories: rubber and polyurethane gladhand seal, dust-flap seals with screens, locks, grips, dummy couplers, pogo stick and tender spring
Air Line and Gladhand Specs, Lengths and Colors
Semi truck air lines and trailer gladhands carry compressed air from tractor to trailer for service and emergency brakes.
Common working lengths are the 12 ft coil, 15 ft coil (sometimes with a 40-inch lead), and 20 ft coil. The listed length is the usable stretch, not the tubing wound into the coil.
Gladhand ports and coiled-line ends are usually 1/2" NPT. Match the thread before ordering.
49 CFR 393.45 requires brake hoses and fittings to meet FMVSS 106; coiled nonmetallic tubing needs a straight 2-inch pigtail inside a spring guard at each end. Quality SAE J844 nylon stays flexible to -40 °F. On 3-in-1 sets the SAE J560 7-way plug’s center pin powers trailer ABS (required since March 1998 under 393.55).
Where Drivers Use Air Lines and Gladhands
Semi truck air lines and trailer gladhands connect the tractor’s air system to the trailer at every hookup. Drivers run the coiled red and blue lines to the gladhands on the nose of dry vans, reefers, and flatbeds.
On doubles and triples the lines continue through the converter dolly to the next trailer. In salt-belt and winter work, nylon coils rated to -40 °F and anodized gladhands hold up better. During drop-and-hook, many drivers park the gladhands on a dummy coupler or lock them together to keep dirt and water out. Fleet shops keep spare seals and replacement coil pairs ready.
How to Connect, Inspect and Replace Air Lines and Gladhands
Semi truck air lines and trailer gladhands connect cleanly: wipe the seals, press them together at 90 degrees, then turn to lock. Connect the emergency line first, then the service line. Support the coils while backing under, charge the system, and test the brakes so you catch any crossed air lines.
Crossed air lines leave tanks uncharged and spring brakes locked-or older trailers with no brakes at all.
Pre-trip air line inspection looks for tight seals, no leaks, enough slack, and no chafing or kinks (393.45). Replace gladhand seals yearly and keep spares; swap the gladhand itself for corrosion or a worn plate.
Why Order Air Lines and Gladhands from Fleet-Hero
Semi truck air lines and truck gladhands keep the brake system sealed between tractor and trailer. Once confirmed, every listing shows length, thread size, color, and the standards it meets (FMVSS 106, SAE J844).
Seals and gladhands ship in case quantities for fleet preventive maintenance, the same way tire inflation hoses are sold by the case. Truck air lines sit alongside cargo securement, tarps, and tire tools so you can order everything in one place.
At Fleet-hero.com you will find air lines and gladhands trusted by owner-operators and fleets, with fast shipping to the Lower 48.




