
Tire Holders & 5th Wheel Tools
2 productsBrowse Subcategories
All Tire Holders & 5th Wheel Tools Products
Filters
2 products
Sort by:


What Are Spare Tire Holders and 5th Wheel Pin Pullers?
A spare tire holder, also called a spare tire carrier, keeps a mounted wheel and tire secured on a semi truck or trailer - mounted behind the cab, along the frame rail, or underneath the trailer. It holds the spare so it does not shift during travel, and it is there when a tire fails on the road. Under FMCSA 49 CFR 392.9, the spare tire holder must be secured before driving a commercial motor vehicle .
A 5th wheel pin puller is a long steel rod with a hook and T-handle. It reaches the fifth wheel release handle so the driver can uncouple a trailer without climbing underneath and pulling with both hands . On a semi tractor, the fifth wheel has locking jaws that hold the trailer kingpin in place. Federal rules require a positive manual release to open that lock - the release handle is what the puller connects to .
Types of Spare Tire Holders and 5th Wheel Tools We Carry
Back-of-cab tire carriers that mount a 22.5" or 24.5" spare behind the cab, often with the cab rack on flatbed tractors.
Under-trailer basket carriers and Nash-style mounts for dry vans, reefers and flatbeds, plus frame-rail spare tire mounts that keep the tire tight against the frame.
Chain-and-lock tire racks with adjustable frames, zinc-coated chain, tensioner and padlock that fit standard and super single tires.
Rod-style 5th wheel pin pullers with a J-hook or S-hook and T-handle, plus collapsible strap pullers that fold into a side box.
Spare Tire Holder and 5th Wheel Puller Specs
A semi truck spare tire holder secures replacement rubber on the back of cab or under trailer, fitting 22.5" / 24.5" wheels up to a 42" tire diameter, or wide super single tires. Constructed from 12-gauge steel with a powder coat / E-coat or lightweight aluminum finish, a trailer tire holder keeps your spare tire for trailer units locked down.
For releasing fifth wheel kingpin locks without strain, a 24"-36" pin puller crafted from 3/8" chrome-plated rod features a comfortable 5" T-handle.
Where do drivers use a spare tire holder and a 5th-wheel puller
Flatbed and step-deck tractors keep the spare on a cab-rack carrier behind the cab-easy to reach and off the deck. Dry van and reefer trailers stow theirs in an under-trailer basket carrier, clear of the load.
Drop-and-hook and regional drivers who switch trailers several times a day use a 5th wheel pin puller on every uncouple instead of climbing under. Tractors with air-release fifth wheels open from the cab and do not need a puller. The same hooked rod also opens roll-up door latches.
How to Mount a Spare Tire Holder and Use a 5th Wheel Puller Safely
Mounting the carrier. Pick bolt-on vs weld-on to match your trailer frame. Bolt-on carriers suit trailers you cannot weld on, but check the frame width against the carrier and use the matching mounting kit.
Uncoupling steps. Ease pressure off the locking jaws, set the brakes, chock the trailer wheels if needed, lower the landing gear, disconnect the air and electrical lines, then raise the release handle lock and pull the handle with the 5th wheel puller. Keep legs and feet clear of the rear tractor wheels, and never crawl under the trailer to reach it. Grease the fifth wheel top plate and lock mechanism on schedule - weekly on many operations - so the handle pulls freely with fifth wheel grease.
Why Order a Spare Tire Holder and 5th Wheel Tool from Fleet-Hero
Tire carriers that pair with the aluminum cab rack and U-bolt install kit already listed. Every listing shows tire fit, material and puller length so you match 22.5" or 24.5" spares and the right 5th wheel pin puller the first time.
Semi truck tools, tire gauges and cargo securement ship in one order.
At Fleet-hero.com you will find spare tire holders and 5th wheel pullers trusted by owner-operators and fleets, with fast shipping to the Lower 48.




