
Aluminum Truck Rims
1 productBrowse Subcategories
All Aluminum Truck Rims Products
Filters
1 product
Sort by:

What Are Aluminum Truck Rims?
An aluminum truck rim is a one-piece disc wheel designed specifically for Class 8 tractors and semi-trailers, not smaller 13–16" utility or boat trailers. Built for heavy-duty drive, steer, or trailer axles, standard 22.5 x 8.25 North American wheels use a hub-piloted system with 10 studs on a 10 x 285.75 mm bolt circle and a 220 mm center bore.
Unlike cast wheels, Fleet Hero’s forged aluminum rims are pressed from a solid aluminum billet under immense pressure for superior strength and weight savings.
Types of Aluminum Truck Rims We Carry
Aluminum truck rims split by size and finish, and that's how most drivers pick them. Here's what's on the shelf.
22.5 x 8.25 forged aluminum wheel, polished both sides - 7,400 lb load rating, 10 x 11.25" bolt pattern, 8.66" center bore, TR544D valve, roughly 48 lb. A forged 22.5 x 8.25 wheel is the standard drive and trailer size on Class 8 equipment.
Polished both sides means it can run as an inner or outer dual and still look finished from either side of the truck - no more half-dull wheel on the outside of your drives.
Other aluminum wheels worth knowing about - 24.5 x 8.25, 22.5 x 9.00 steer wheels, and wide-base 22.5 x 14 singles that replace a full set of duals. Listed here only if we add them.
Want steel instead? The Steel Rims page has 22.5 x 8.25 steel wheels in white and silver.
Aluminum Rim Sizes, Weights and Finishes
Most fleets stick with 22.5 x 8.25 aluminum truck rims for drive and trailer work. Steer axles often run 22.5 x 9.00, tall-tire setups use 24.5 x 8.25, and some convert to 22.5 x 14 wide-base singles.
Size | Aluminum weight | Steel weight |
22.5 x 8.25 | 36–55 lb | 65–85 lb |
Wide-base single | — | Cuts over 1,400 lb off an 18-wheeler |
Finishes come polished on one side or both, mirror polish, or Dura-Bright that cleans with soap and water. A typical forged 22.5 x 8.25 carries 7,400 lb at 130 psi-always read the rollstamp on the actual wheel.
Where Fleets and Owner-Operators Use Aluminum Rims
Aluminum truck rims pay off on weight-sensitive freight-tankers, bulk haulers and flatbeds-where every pound off the wheels becomes legal payload.
Semi-trailers running dry vans, reefers, tank or grain setups on 22.5" hub-piloted axles are the biggest users of aluminum trailer rims. Stop-and-go and vocational trucks also gain because aluminum sheds brake heat better than steel.
Owner-operators who want a polished look run dual-side polished wheels so either side of the dual looks finished.
How to Choose, Mount and Care for Aluminum Truck Rims
Before you buy aluminum truck rims, line up the pilot, bolt circle, center bore, offset and load rating with the axle.
Going from steel duals to aluminum? The discs are thicker-measure pilot length (thickness of the disc plus 5 mm minimum) and stud standout. You may need longer studs.
Torque the M22 x 1.5 flange nuts to 450-500 ft-lb with oil on the threads, crisscross pattern, then retorque between 5 and 100 miles. Grease the hub bore only to stop galvanic corrosion; keep everything else dry on the faces.
Wash with mild soap. No acid wash, no abrasive pads, no liquid tire balancers. Check for cracks, elongated holes or loose nuts under 49 CFR 393.205.
Why Order Aluminum Rims from Fleet-Hero
A forged 22.5 x 8.25 aluminum truck rim, polished both sides, sits at $229 and is in stock with full specs-bolt pattern, bore, offset, valve and load rating-right on the listing.
You can order aluminum and steel 22.5 x 8.25 rims in one order if you run mixed duals. Tire gauges, inflation hoses and tire chains go in the same cart.
At Fleet-hero.com you will find aluminum truck rims trusted by owner-operators and fleets, with pickup in Addison, IL and shipping across the U.S.


