Fleet Hero

Truck Tire Chains

2 products

Browse Subcategories

All Truck Tire Chains Products

Filters

$
—
$

2 products

What Are Semi Truck Tire Chains?

Semi truck tire chains are steel link assemblies that wrap around Class 8 drive tires to deliver grip on snow and ice. You install them at the chain-up area and pull them off once the pavement clears. Sold by the pair-single-tire sets come one pair per bag, dual or triple sets for dual wheels come as a half-pair-these chains keep the truck moving when rubber alone cannot.

A legal chain in Colorado, for example, consists of two side chains joined by at least nine evenly spaced cross chains built to SAE or NACM specs; clip-on devices do not qualify. Manufacturers rate them for low-speed use only-30 mph maximum, with California often posting 25 or 30 mph under chain controls. Rubber spider tensioners keep the assembly snug so it does not slap the fender or wear out early.

Types of Tire Chains and Tensioners We Carry

  • H2247SC twist-link cam-type singles – a pair of heavy truck chains built for single 22.5" and 24.5" Class 8 tires. Carbon-steel twist-link cross chains, roughly 51lb per pair, and a heavy-duty lever fastener. Built-in cams let you tighten without a separate tensioner.

  • Common chain styles on the market: twist link for highway service, square-link alloy for longer wear, V-bar with welded ice breakers for packed ice, diamond pattern for side grip, and cable chains when clearance is tight.

  • Singles, dual/triples, and wide-base – part numbers starting with 2 are singles; 4 are dual/triple chains for dual wheels; 3 are wide-base and super-single chains.

  • Cam vs non-cam – non-cam chains need a tensioner; cam chains make the tensioner optional. A cam tool ships with cam-type sets.

  • Rubber spider tensioners sized for semi wheels - Class 8 trucks need an adjuster made for 18–24.5" or 21–24.5" rims. A 13" spider for 11–16" rims is for light trucks and trailers only.

Semi Truck Tire chains: Sizes and Fitment Chart


Semi truck tire chains are sized by the tire, not the wheel - read the sidewall, not the rim. One part number usually covers several sizes.

Chain Part No.

Fits Tire Sizes

Type

Weight per Pair

2247 (H2247SC)

295/75R22.5, 285/75R22.5, 305/70R22.5, 275/80R24.5, 11R22.5

Single

~51–52 lb

2249

11R24.5

Single

~53 lb

4247

Same sizes, dual/triple fitment

Dual/Triple

~94–96 lb

11R22.5 appears on most supplier lists but not all - confirm before ordering.

H2247SC build: 14 cross chains per half pair, 10 links per cross chain, 0.281" wire. Prefit every chain on the truck before winter - the fit check belongs in the yard, not at the chain-up area. 

Where Truckers Need Tire Chains: Chain Laws by State


Semi truck tire chains provide critical traction when snow, black ice, and steep mountain grades threaten commercial vehicle stability. In heavy-duty logistics and over-the-road freight, tire chains for trucks are an essential winter safety tool designed to keep Class 8 rigs moving and prevent jackknifing.

Colorado: Under state Must Carry Law guidelines, commercial vehicles over 16,000 lb must carry heavy duty truck tire chains from September 1 to May 31 on I-70 and six other mountain corridors. When active chain control is signaled, drivers are required to chain at least four drive tires. Failing to carry commercial truck tire chains results in a $500 fine, while blocking the road without proper truck tire chains can incur fines up to $1,000.

California: Caltrans chain controls mandate that heavy-duty vehicles over 6,500 lb chain up when controls are posted. Snow tires do not exempt heavy trucks, and a semi-trailer needs one set of tire chains on truck tires regardless of how many axles it has. Carrying a pair of semi tire chains or dual chain setups ensures full compliance on mountain passes.

Washington: WSDOT chain requirements specify that vehicles over 10,000 lb must carry at least two extra tire chains for semi trucks from November 1 to April 1 on listed routes, such as I-90 between North Bend and Ellensburg.

Oregon: According to ODOT chain requirements, a tandem-drive tractor pulling a semi-trailer must chain two tires on each side of the primary drive axle plus two tires on a trailer axle. Failing to carry and use tire chains for semi is classified as a Class A violation for commercial drivers.

Dedicated chain-up areas on mountain passes give drivers a safe, flat space to put on or remove 11R22.5 tire chains and tensioners. Truckers running winter routes keep a complete set of singles or dual cam type twist link alloy chains stored in their side box all season.

How to Install, Tension and Inspect Tire Chains


Park clear of the lane, brakes set. Flatten the chain and work out the tangles before lifting it. Drape it over the drive tire - hooks facing away from the sidewall, fastener outside. Roll forward until the second cross chain sits under the tire, then hook the inside, fasten the outside, snug the cams.

Drive a short distance as the maker directs, stop, re-tighten. Tensioners go on after that. Clip or tie loose tail links.

Stay under 30 mph - a chain loose by one link keeps half its life at 30 but only 7% at 50. A broken cross chain means stop: repair link or pull it off. Clean and dry before storage.

Why Order Semi Truck Tire Chains from Fleet-Hero

Winter chain laws don't wait, and neither should your order. Fleet-Hero stocks semi truck tire chains for sale by the pair - H2247SC cam-type singles in 22.5" and 24.5" - with a tire size chart on every listing so you get the right fit the first time.

Fleet bulk orders ship in volume for operations outfitting several trucks before the season starts. Add tensioners, repair links, tire gauges, and cargo securement to the same order and skip the second shipment.

Local pickup in Addison, IL. Fast shipping across the Lower 48.