
Truck & Trailer Winches
6 productsBrowse Subcategories
All Truck & Trailer Winches Products
Filters
6 products
Sort by:





SKU: W4DTS AZ FHE

What Are Flatbed Winches?
A heavy-duty flatbed winch acts as the tensioner and anchor for securing cargo on flatbed trailers, step-decks, and hotshots. Mounted directly to the trailer rail, this cargo winch uses a steel mandrel (spool) with a web slot to feed the strap, a spring-loaded ratchet sprocket and pawl to hold tension, and a winch bar end cap for leverage tightening.
Unlike an electric recovery winch or boat-trailer hand winch, it has no motor or cable drum. It anchors a synthetic web tie-down, rated separately under FMCSA 49 CFR 393. A standard 4-inch flatbed trailer winch fits 2", 3", or 4" straps with up to a 5,500 lb WLL rating.
Types of Winches and Winch Mounts We Carry
Sliding Winch (Slider Winch)
Standard 4-inch frame; rides on continuous winch track.
Rides along side rails and locks automatically under strap tension. Delivers flexible tie-down positioning with a 5,500 lb WLL.Weld-On Winch
Permanent side-or bottom-mount weld.
Ideal for continuous routes and fixed flatbed configurations requiring maximum stability.Bolt-On / Portable Winch
Mounts to trailer side flanges using set screws.
Provides secure anchor points without requiring welding or permanent modifications.Stake Pocket Winch
Drops directly into existing trailer side pockets.
Tool-free installation. Inward-offset versions clear tarp-track trailers effortlessly.Specialized Winches
Low-profile, 3-bar, combination, or 2" lashing models.
Fits tight clearance spaces, handles icy straps (3-bar), accepts wire cable (combination), or offers quick release (2" lashing).
Winch Specs, Capacities and Track Sizes
Standard 4" flatbed winches feature a 5,500 lb WLL / 16,500 lb break strength based on a 3:1 design factor. Webbing capacity dictates frame size: standard units hold 25–50 ft, low-profile roughly 15 ft. Frame options pair with 6 ft C-channel track, 1/4" wall steel or double L track. Constructed from heat-treated carbon steel to WSTDA-T-3 standards.
Where Flatbed Drivers Use Winches
On flatbed, step-deck, and hotshot trailers hauling lumber, steel, machinery, or pipe, drivers rely on flatbed winches to maintain tension. Dedicated fleets run weld-on models at fixed spacing, while drivers with shifting loads use sliding winch configurations. Throwing a 4-inch strap from a trailer winch over the load to a flat hook on the far rub rail creates an indirect tie-down counted at its full WLL toward the aggregate working load limit (393.106(d)(3)).
When tire clearance blocks bottom-mount units, stake pocket or bolt-on options add secure anchors. Low-profile models suit tight clearances, while 3-bar winches prevent frozen straps on winter routes.
How to Choose, Mount and Inspect a Winch
Start with the trailer. Match the winch to the track already on the rail – C-track or double L, they do not interchange. Weld-on suits fixed spacing, sliding covers mixed loads, bolt-on or stake pocket when welding is off the table. Mount so the pawl stays visible and drops by gravity between the ratchet teeth; never between tire and bed. Weld-on takes a 1/4" fillet weld, 4" long each side, 1/8" penetration; steel C-channel track welds, aluminum bolts at every cross member.
Feed the strap through the mandrel slot, keep two to four wraps, tension with a winch bar - no cheater pipe. Inspect before every trip under 49 CFR 393.104 and 393.110.
Why Order Flatbed Winches from Fleet-Hero
Sliding winches that drop straight onto the standard 4" double L track on most North American flatbeds need no adapters. Fleet-Hero’s double L slider adds a fixing bolt and nut so it stays put even when the strap goes slack-unlike units that hold only under tension.
Every listing shows WLL, break strength and strap width so you order the right winch the first time. Matching 4" x 30 ft flat-hook straps, 40" winch bars and strap winders ride in the same cart. Bulk packs and fleet pricing are ready for shops re-rigging a trailer, with fast shipping across the Lower 48.
At Fleet-hero.com you will find flatbed winches trusted by owner-operators and fleets, with fast shipping to the Lower 48.







