Fleet Hero

Smoke Tarps

2 products

Browse Subcategories

All Smoke Tarps Products

Filters

$
—
$

2 products

What Are Smoke Tarps?

A heavy-duty smoke tarp-also called a nose tarp by flatbed haulers-is a compact 18 oz vinyl shield designed to protect the front of the load sitting directly behind the tractor stacks.

Rather than covering the entire deck like lumber or steel covers, this fitted nose tarp guards the leading cargo face against hot exhaust soot, road debris, and bugs that slam into freight at highway speeds.

Types of Smoke Tarps We Carry

  • Fitted smoke tarps (also called box or nose tarps) come with sewn corners that form a box shape-common sizes like 8x8x2-so they slide clean over a square load face for a tight, watertight fit.

  • Flat smoke tarps are simple rectangles (10x12, 12x16, 12x20) that fold over irregular fronts and strap down with D-rings.

  • Lighter nose tarps around 9'8" x 10'9" cover just the upper front of standard loads.

All of them use heavy-duty 18 oz vinyl-no lightweight versions make sense here.

Smoke Tarps: Sizes, Fabric and Specs

Fitted styles of smoke tarps are sized width x height x depth - 6x8x2 and 8x8x2 are the common ones. That last number trips people up: it's how far the box wraps back over the top of the freight, and every seller words it differently, so read twice before ordering.

Flat cuts are simpler - 10x10, 10x12, 12x16, 12x20. No corners sewn in, just a rectangle you fold over an odd-shaped front and strap down.

Nobody's breaking a sweat lifting these. A 6x8x2 fitted runs around 14 lb, a 10x12 flat about 19 lb. One guy on the catwalk handles it fine.

The whole category is 18 oz PVC-coated polyester, roughly 20 mil thick. Waterproof, holds up to UV, won't mildew sitting rolled on the trailer.

Count the hardware before you buy: one to three rows of welded D-rings backed with wear flaps, brass grommets spaced about every 24 in, heat-sealed seams, webbing-reinforced hem.

Cold-crack numbers move around by maker - somewhere between -30 deg C and -40 deg F.

Where Flatbed Drivers Use Smoke Tarps 

When hauling PVC pipe, foam board, saplings, granite, or building materials, a smoke tarp flatbed setup shields freight from soot and road grime. Drivers throw a 10x12 flat or 8x8x2 fitted nose tarp on short hauls, use one to close the open end of a tarped load, or add extra nose protection under a heavy duty lumber cover.

How to Choose, Secure and Care for a Smoke Tarp

Choose a fitted smoke tarp for a square, boxed load face, or a flat heavy duty 18 oz vinyl nose tarp for irregular fronts like pipe bundles. Size your 10x12 flat or 8x8x2 fitted nose cover so it shields the full front face and leading edge. Place corner protectors on sharp edges to absorb wind load, then cinch the D-rings tight using rubber tarp straps or bungees to stop wind uplift. Seal minor tears early with a tarp repair kit and store dry.

Why Order Smoke Tarps from Fleet-Hero 

Order heavy duty smoke tarps alongside steel, lumber, and parachute covers to build your entire flatbed tarp kit in one order. Bundle durable 18 oz vinyl nose tarp options with natural rubber tarp straps in 9", 15", 21", and 31" sizes to secure every edge. Clear size, style, weight, and D-ring layouts appear on every listing for accurate load securement.

At Fleet-hero.com you will find smoke tarps for sale with reliable U.S. shipping across the Lower 48.