Fleet Hero

Tarp Repair Tape & Patches

2 products

Browse Subcategories

All Tarp Repair Tape & Patches Products

Filters

$
—
$

2 products

What Are Tarp Repair Tape and Patch Kits? 

When a flatbed tarp tears on the road, you've got two ways to fix it: tarp repair tape or a tarp repair kit. The tape is a strip of vinyl - usually the same PVC-coated polyester your 18 oz or 14 oz truck tarp is made of - with peel-and-stick adhesive on the back. It closes a rip in seconds without pulling the tarp off the load. A tarp repair kit goes further: it gives you pieces of matching patch fabric plus a can of vinyl cement, so the patch actually bonds into the tarp instead of just sitting on top of it.

Both are built for lumber, steel, coil, machinery and roll tarps. They handle punctures, abrasion wear and damage around grommets - the spots that fail first.

Drivers who’ve patched tarps with a tarp repair kit for years will tell you the same thing: tape gets you home; a cemented patch gets you through the season.

Never promise a tape repair will last for years.

Types of Tarp Repair Supplies We Carry

  • Heavy duty tarp repair tape rolls in 2", 4" and 6" widths, 10 ft to 50 ft lengths, black and matching tarp colors for fast trailer fixes.

  • Vinyl tarp repair kit choices: a cab kit with one 2×2 ft patch plus 8 oz cement, or a pro tarp repair kit with several patches and a quart of cement for the shop.

  • Vinyl cement and thinner sold alone for fleets that cut their own fabric.

  • Pre-cut tarp repair patches with radius corners that peel far less than square ones.

  • Grommet kits in #2 (⅜") and #4 (½") complete with hole cutter, punch, die and roller.

Tarp Repair Tape and Patch Specs

Spec

Detail

Tape sizes

2", 4", 6" widths; 10–50 ft lengths; ~25 mil thick

Vinyl cement

Apply 35–95 °F; cured range –30 to 150 °F

Tack / cure

Tacky in 2–10 min; 1 hr usable, 24-hour cure (full in 7 days)

Coverage

~1 oz cement per sq ft of patch

Grommets

#2 = ⅜" hole, #4 = ½" hole

These numbers decide if a tarp repair kit or heavy-duty tarp repair tape fits the job and weather on flatbed trucking. At Fleet-hero.com you will find tarp repair supplies with width, length, temperature range and cure time listed plainly.

Where Drivers Use Tarp Repair Supplies

On steel, lumber, coil, and machinery loads, sharp edges and banding cause sudden tears. High-flex areas suffer grommet blowouts, corner tears, and fold splits. A heavy-duty tarp repair tape roll kept roadside fixes fast, while vinyl cement patches solve shop-level trailer tarp repair and truck tarp repair on 18 oz PVC.

Note: vinyl products are not for parachute nylon or poly tarps.

How to Repair a Vinyl Tarp

  1. Check the damage. If the tear reaches the D-rings, strap webbing or a seam, stop -that tarp goes to a shop or gets replaced.

  1. Clean the area. Wipe it with rubbing alcohol or cement thinner and let it dry. Scuff glossy spots lightly so the cement bites.

  1. Cut the patch. Give yourself a 2-inch overlap on every side and round the corners so edges don't lift.

  1. Glue and press. Coat patch and tarp with vinyl cement, wait for tack, press down and roll from the center out. Patch both sides of a big tear.

  1. Let it cure. An hour minimum, 24 hours is better, before it goes back on a load. Only glue between 35 and 95 °F.

Why Order Tarp Repair Supplies from Fleet-Hero

Repair supplies here match the same vinyl fabric used in the steel and lumber tarps in the catalog-vinyl tape and cement that bond correctly. Drivers can buy tarp repair kits, rubber tarp straps and the tarp itself in one order so the heavy-duty tarp repair kit arrives ready to use. Every listing shows width, length, temperature range and cure time.

Local pickup is available in Addison, IL with fast U.S. shipping across the Lower 48. At Fleet-hero.com you will find tarp repair tape and kits trusted by flatbed drivers, with fast shipping to the Lower 48.